About DNA System

Problem

• Construction sites are usually fire vulnerable area with low brightness, absence of electric facility and fire alarm system. Huge possibility of fire from wielding because lots of flammable materials such as urethane foam, oil mist, paint, insulator and LP gas.
• Fire safety overseer might have a hard time to cover the whole site and make a proper evacuation route because of obstacles, complicated paths and workers’ carelessness.

Solution

• Mobile-Smart fire safety device for monitoring construction and fire hazard area.
• Prompt reaction for fire and incident by forming temporary telecommunication network with mesh-networking technique over big architecture, construction site and out-of-signal telecommunication area.
• Early Fire Detection and Risk Prediction for Fire Hazard Areas
• A portable fire safety monitoring system with video verification accessible to fire safety managers

• Telecommunication function attached digital automatic fire suppression device dedicated to early fire detection & protection of semiconductor & cutting edge manufacturing devices.
• Real time monitoring of automatic fire suppression device’s input-output signals from central fire protection center with transmission module inside.
• Prompt detection and suppression by predicting and monitor fire incident that leads minimizing loss human life and property.
• Synchronizing thermal sensor and weight measuring sensor of extinguishing agent in order to monitor protected area and fire suppressing system.
• Implementing CO2 extinguishing agent to achieve higher electrical insulation and lesser remains after extinguishing agent ejection in order not to harm the devices in semi-conduct, cutting edge product manufacturing facility and cleanroom.
• Cost-efficient and easy to construct with “package system”

• In respect of Korean regulation of building’s evacuation & fire protection 14th article paragraph 3, fire damper must provide automatic shut and open function when fire or smoke is detected. So it is mandatory to install duct smoke detector and when it detects fire or smoke it should be shut automatically.
• The system provides sampling of air flow within the duct and it detects smoke particle. When the system detects smoke particle it activates fire alarm and fire protection damper in order to block air flow of specific area for preventing diffusion of smoke and fire.

• Real time monitoring with camera integrated flame detection system.
• Integrated camera within flame detector (supports 1920x1080 HD-SDI, EX-SDI)
• Data gathered from camera can be monitored by using PC/Smartphone monitoring system which enables prompt reaction for fire alarm in order to minimize human life and property loss